eDP/DP PHY

The Innosilicon eDP DP PHY is a highly reliable solution for your display interface requirements. It is fully compliant with DP 1.4 and eDP 1.4 standards, and capable of driving 2.7Gb/s per lane in configurations up to 4 lanes.

Designed with ease of integration in mind, it is configurable via its I2C, APB or CPU interface, and production testing is simplified through at-speed BIST, scan, loopback modes and boundary scan.

The PHY itself is fully self-contained, requiring no end user synthesis, and is optimized for both area and power. It contains all the necessary PHY components such as I/Os, primary and secondary ESD, PLL and the data symbol Synchronization/Serialization unit.

As with all Innosilicon IP, we are ready to provide the custom solution that meets your needs.

KEY FEATURES:

All major processes fully covered, such as 110nm, 55nm to 28nm, 22nm, 14nm, 12nm, 8nm, 7nm, 6nm, 5nm.
Easily ported into any technology
Uses standard chip digital and IO supplies
Compliant with DP 1.4 and eDP 1.4 standards
Drives up to 8.1 Gb/s per lane
Available in 1~4 lane PHY configurations
Output the link rate clock or half link rate clock, with or without SSC modulation
Supports transceiver for AUX channel working in 1MHz Manchester II coding mode
Area<0.53mm^{2@12/14nmFinFET}
Low pin count
20-bit, 8b/10b data encoding, parallel input bus
Integrated low jitter,PLL
Embedded primary and secondary ESD provides 2000V HBM, 200V MM and 500V CDM
The design is latch-up tolerant to 200mA
Production test supported with BIST, scan, boundary scan and loop back
Deliverables support all major EDA tools
Optional DP 1.2 controller available

INNOSILICON ADVANTAGES:

Low power consumption
Fully customizable
Small area
Simple integration process
Available options include
- Test chips and test boards
- FPGA integration support
- Chip level integration

BLOCK DIAGRAM:

EXAMPLE APPLICATIONS:

一键启动，简化您的下一个产品设计流程！