56G/64G SERDES

The Innosilicon 32/56/64G SERDES PHY is a highly configurable PHY capable of supporting speeds up to 64Gbps within a single  lane. The PHY has been configured to support a wide range of HS SERDES protocols, including 64G PAM-4 and NRZ, through changes to the PCS layer and register settings.

The hard-macro PHY is well-architected for IEEE and OIF protocols, with ESD structure and BIST function accommodated. This IP powers high-speed interconnectivity between chips, optics and backplanes with the built-in low-jitter LC PLL and CDR to optimize the signal integrity. The Innosilicon 64G Long Reach Serdes solution meets the functionality, power, performance and area requirements of a variety of network applications.

KEY FEATURES:

64Gbps serial data speed, supports IEEE 802.3 and OIF standards electrical specifications.
Support 28-32G VSR/SR/MR/LR NRZ and 64G PAM-4.
Support up to -36dB+ insertion loss @14GHz.
Reference ;clock: 100/156.25MHz from external or through on-chip
Embedded high precision low jitter LC PLL and CDR loop.
85-ohm differential on-chip terminated drivers and receivers with automatic impedance calibration.
Multiple Built-in self-test modes and test pattern generation.
Near-end serial loopback for testability.
Far-end parallel loopback for testability.
Proprietary low cap ESD structures.
On-chip PRBS generation and verification controlled from external terminal.
Well-tuned IO and PKG model to achieve good SI and performance.

STANDARD COMPLIANCE

The PHY is fully compliant with the  following standards:

PCIE6/5
IEEE 802.3 and OIF
CEI-56G+ LR PAM-4
CEI-25G+ LR/MR NRZ
JESD204C/B (25/32G)
10GKR/100G KR-4 LR
400GAUI-8 LR/MR
CEI11G-LR

Test Eye-diagram & Jitter Histogram （56Gbps）:

EXAMPLE APPLICATIONS:

一键启动，简化您的下一个产品设计流程！